Search This Blog

Showing posts with label house. Show all posts
Showing posts with label house. Show all posts

Wednesday, January 2, 2019

Don't Burn the Christmas Tree!

Chimney fire with flames coming out of the top of the chimney

When deciding what to do with a real Christmas tree this year, be sure putting it into a burning fireplace is not on the list of options. Dry pine is extremely flammable and burns very hot and fast - too fast and hot in fact for a friendly fire inside the fireplace.

Burning dry pine trees are the cause of many chimney fires each year - and many of those evolve into structural house fires. As soon as dry pine is placed on a burning fire it erupts into a ball of fire which reaches up into the flue where flammable creosote can ignite.

Chimney fires may only last a few seconds, but some can last much longer depending on the amount of fuel (creosote) inside the flue that is available to burn. The longer the fire, the higher the risk of flame escaping into the structure.

Instead, think about chopping the tree up into very small pieces to use for kindling throughout the winter. Pine is a great firestarter.  An added benefit is that you can get some exercise while chopping!  If chopping is not your thing, some cities offer Christmas tree pick up service, and will haul the tree off for you.

More ideas for dry Christmas trees:


  1. Cut the tree up into larger pieces to use in an outdoor firepit or bake oven.
  2. Cut the tree trunk into thin slices to make coasters. Sand smooth, and apply a coat of polyurethane to seal in sap.
  3. Cut the trunk into thin slices, then drill a hole near the top for string, and donate to a scout group or school for an art project. 
  4. Use the pine needles for mulch.
  5. Rent a wood chipper and run the tree through it, then use the chips as mulch in the spring.
____________________________________

Marge Padgitt is an author and chimney professional living in Kansas City, Missouri. Contact her at margepadgitt@comcast.net. 

Wednesday, December 30, 2015

Your house might be making you sick


As people close up their homes for winter, sealing every open gap, and installing thermal windows and insulation, they may be doing more than making their home energy efficient. They might be doing things that can make their family ill. 

A smoking fireplace is a sign of  negative house pressure
Houses need at least six air exchanges per day, according to the Environmental Protection Agency.  These air exchanges are necessary in order to move out tobacco smoke, Carbon Dioxide, Carbon Monoxide, Nitrogen Dioxide, Radon, and a host of other chemicals such as Formaldehyde that off-gas from furniture, carpet and woodwork.  These air exchanges bring in fresh air for the occupants to breathe. 

Exacerbating the problem are appliances that take air out of the house such as attic fans, range hoods, bathroom fans, clothes dryers, and central vacuums. If the house is tightly constructed replacement air needs to be introduced somehow. 

Appliances such as furnaces, hot water heaters, fireplaces, and wood-burning stoves need air for combustion, and they take house air for this purpose.  Open fireplaces are only -10 - +10% efficient, and use heated air from the home, causing the furnace to work harder.  Even if an outside air source is supplied to a fireplace in an attempt to use less house air, this is often inadequate, and is arguably not the best solution.  Cold air dumped on a hot fire cools it down, causes it to burn inefficiently, and to produce more CO.

High efficiency fireplace by Regency
High-efficiency gas fireplace inserts are approximately 75% + efficient and use no indoor air for combustion. Wood-burning fireplace inserts and freestanding stoves are generally 70%+ efficient and use much less house air for combustion than traditional open fireplaces do. These are good choices whether a home has inadequate air for combustion or not. Other methods to improve fireplace efficiency include installation of glass doors, use of a grate heater, and improvement in design.  A Rumford or Prior Fire style fireplace is a better choice than a standard style fireplace because it uses less air and is more efficient. Efficient fireplaces or inserts use less wood than standard fireplaces to produce the same amount of heat, so an added benefit is lower energy cost. 

Another problem that can occur in larger homes or homes that are tightly constructed is unbalanced house pressure.  According to Dr. David Penney, professor of Physiology and Adjunct Professor of Occupational and Environmental Health and Wayne State University, and creator of COHeatquarters.com, Carbon Monoxide (CO) is the most commonly encountered and pervasive poison in our environment. Dr. Penney believes that long term exposure to low levels of CO (even those that don’t register on a CO alarm) are capable of producing  many debilitating residual effects on the human body. This is called chronic CO poisoning, or CO Poisoning Syndrome.

Symptoms of negative house pressure are moisture condensation on cold surfaces, smoking fireplaces or wood-burning stoves, difficulty lighting a fire in a fireplace, CO backup from gas and wood appliances, back-drafting of appliances (and CO), CO detector alarms go off frequently, and cold air infiltration through leaks.  Children and pets may be more affected than adults. If a person feels ill when at home, but better when outside the home, this is an indication that something is wrong with the house.

Health effects associated with CO Poisoning Syndrome are unexplained flu-like symptoms, headaches, dizziness, fatigue, confusion, joint pain, muscle pain, chronic fatigue, vertigo, numbness, eye and nose irritation, fainting, nausea, and in more serious cases, inability to wake up, asthma, cancer, irreversible brain damage, or even death. Other symptoms include cognitive and memory impairments, mood changes, depression, sensory and motor disorders, and in more serious cases, seizures, balance problems, and tremors. These symptoms can continue for weeks, months, or years after termination of CO exposure, so it is imperative to assure good indoor air quality at all times at work and at home.


Strategies to improve air quality:

1.      Install portable air cleaners
2.      Maintain humidifiers and dehumidifiers and empty water trays
3.      Replace air filters on schedule
4.      Turn on whole house fans or bathroom and kitchen fans with doors or windows open occasionally in spring and summer (not during cold weather)
5.      Install a heat recovery ventilator (HRV) to the furnace (assists the furnace only)
6.      Install a whole-house ventilator to bring in make-up air for appliances and fresh air to breathe
7.      Install EPA Certified high-efficiency gas or wood-burning inserts in fireplaces
8.      Be sure clothes dryers are properly vented outdoors and vents are cleaned twice per year
9.      Use a vented gas space heater or stove rather than an un-vented gas appliance
10.  Never use kerosene heaters inside the house
11.  Have a trained licensed HVAC contractor clean and tune-up furnaces annually
12.  Have a professional CSIA Certified Chimney Sweep inspect and clean furnace, fireplace, and wood stove flues annually and check for negative house pressure
13.  Have an energy specialist do a blower door test on the home, which will indicate leaking areas and negative pressure issues. Some cities offer this service for free. 
14.  Be sure to have a properly sized flue liner installed for a hot water heater if a furnace is replaced and vented out the side of the house. The water heater will no longer be able to vent on its own without the furnace and CO backup can result


Sources:


----------------------------------------------------------------------------------------------------------------------

Marge Padgitt is the president of HearthMasters, Inc. chimney contracting company in Kansas City, MO. She is the editor of Wood-Fired Magazine, author of The Chimney and Hearth Pro's Resource Book and more books coming in 2016. 

Monday, March 3, 2014

Use of fireplace for heating can cause house fire

Photo: CScottDorrett - Fotolia.com
During the extreme cold we are experiencing throughout much of the United States this winter many people attempt to use their fireplace as a source for supplemental heat. But what most homeowners are unaware of is that fireplaces are designed for ambient fires only, and are not meant to be used for heating purposes.

Open fireplaces are inefficiently designed so that most of the heat escapes into the flue, rather than the home. In fact, open fireplaces use heated room air for combustion, thereby lowering the temperature inside the house. Exception: Rumford style fireplaces.

According to the Midwest Chimney Safety Council, chimney sweeps are reporting record calls for chimney service, no doubt due to the unusually long and bitterly cold winter. What the chimney sweeps are finding out is that their customers have been using their fireplaces as a heating source, rather than for just the occasional friendly fire. That is when trouble can happen.

Open wood-or gas burning fireplaces are designed with clearances to combustibles set at certain distances with the idea that people will use their appliance for short periods of time – up to four hours in duration. Once that time has been exceeded, or before if improperly installed,  the nearby combustible materials may overheat and ignite. Combustible headers and studs, which are hidden from view by finishing materials may not be properly installed with proper clearance, which makes matters even worse. Unfortunately, improper construction around fireplaces is a common issue and many house fires have been the result.

Nearby combustible wood may pryolizes over time due to exposure to heat through the masonry or metal fireplace. Pyrolization is the chemical alteration of wood, which lowers the ignition temperature significantly. Wood normally ignites at 500 degrees, but pyrolized wood can ignite at 180 degrees or lower.

After a Raytown, Missouri house fire in 2009 Fire Investigator Gene Padgitt was requested to find the cause and origin of the fire. The customer had used their masonry fireplace as the sole source of heat for three days while they had no gas after moving in their new home on a Friday. Combustible wood framing, which was improperly installed above the fireplace without proper clearances, ignited due to exposure to heat for the prolonged period. Padgitt said that this scenario is all too common and that unfortunately, he sees it often.

In yet another fire investigation in Topeka, Kansas in 2012 Gene found that the homeowner used a manufactured gas fireplace for seven days straight when wood framing, which was properly installed, ignited. The fire caused a total loss. The homeowner thought that he could heat his house with the fireplace.

This type of burning is called "Over-firing" in the chimney and hearth industry. The fact is that masonry fireplaces do not come with a homeowner's manual, and rarely do new home buyers find a manual for their manufactured fireplace. So it is up to the homeowner to get operation information from his chimney sweep or from websites.

Certain wood and gas appliances are designed for heating, while others are designed for ambient fires. Since there are no standards in the industry that have been adopted for masonry fireplaces, Padgitt suggests that homeowners use common sense when operating a fireplace or stove.  He suggests the following:

Appliances designed for ambient fires:
  • Wood-burning manufactured fireplaces (read the manufacturer instructions)
  • Wood-burning masonry fireplaces
  • Gas-burning manufactured fireplaces (read the manufacturer instructions)
  • Gas-burning masonry fireplaces
Appliances designed for heating:
  • Wood-burning freestanding stoves with proper clearances
  • Wood-burning fireplace inserts in masonry fireplaces
  • Wood-burning masonry heaters
  • Direct-Vent Gas fireplaces (per manufacturer instructions)
  • Non-Venting gas logs in masonry fireplaces (read the manufacturer instructions which likely state that they are not to be used for longer than four hours at a time)
All gas and wood burning appliances should be installed by a professional technician, and inspected annually and swept or serviced as necessary by a professional chimney sweep or certified technician. Wood-burning stoves and inserts should be swept at least twice per season if used for primary heating purposes, or used on a regular basis in order to remove flammable creosote.

Note: Non-Venting gas logs and wood-burning fireplace inserts should never be installed in manufactured fireplaces. To do so voids the warranty on the fireplace, and alters the fireplace which is a code violation. Any alteration can be a fire hazard.

Resources:
Masonry Heater Association of North America
Chimney Safety Institute of America
Midwest Chimney Safety Council
National Fire Protection Association

Tuesday, January 7, 2014

House fire caused by fireplace embers

A house fire was reported shortly after 6:00 a.m.today in the 5800 block of Woodward Street in Merriam, Kansas.

Firefighters quickly brought the blaze under control, which was contained to the back part of the house. The initial cause of the fire is listed as fireplace embers in a container placed on a combustible surface on the back enclosed porch.

Four people escaped on their own in the current sub-freezing temperatures, but their black Labrador had to be rescued by firefighters, who used oxygen on the dog according to media reports.
According to Midwest Chimney Safety Council president Steve Hoover, fireplace embers should be placed into an ash container with a raised base, then removed to a non-combustible area outside away from the house. A hole dug for this purpose and covered with dirt is ideal. Embers can smolder for up to two weeks, according to Hoover, who also says that people should not use their open fireplaces for heating purposes in this very cold weather we are experiencing.

Fireplaces are designed for ambiance only and over use for heating purposes could cause a house fire. Instead, the MCSC recommends the use of a wood stove or fireplace insert instead, which are designed for heating.

Sunday, October 28, 2012

Your house might be making you sick


By Marge Padgitt

As people close up their homes for winter, sealing every open gap, and installing thermal windows and insulation, they may be doing more than making their home energy efficient. They might be doing things that can make their family ill.

Houses need at least six air exchanges per day, according to the Environmental Protection Agency. These air exchanges are necessary in order to move out tobacco smoke, Carbon Dioxide, Carbon Monoxide, Nitrogen Dioxide, Radon, and a host of other chemicals such as Formaldehyde that off-gas from furniture, carpet and woodwork. These air exchanges bring in fresh air for the occupants to breathe.

Exacerbating the problem are appliances that take air out of the house such as attic fans, range hoods, bathroom fans, clothes dryers, and central vacuums. If the house is tightly constructed replacement air needs to be introduced somehow.

Appliances such as furnaces, hot water heaters, fireplaces, and wood-burning stoves need air for combustion, and they take house air for this purpose. Open fireplaces are only -10 - +10% efficient, and use heated air from the home, causing the furnace to work harder. Even if an outside air source is supplied to a fireplace in an attempt to use less house air, this is often inadequate, and is not the best solution. Cold air dumped on a hot fire cools it down, causes it to burn inefficiently, and to produce more CO.

High-efficiency gas fireplace inserts are 75% + efficient and use no indoor air for combustion, and wood-burning fireplace inserts and freestanding stoves are 70%+ efficient and use much less air for combustion than traditional open fireplaces do. These are good choices whether a home has inadequate air for combustion or not. Other methods to improve fireplace efficiency include installation of glass doors, use of a grate heater, and improvement in design. ARumford style fireplace is a better choice than a standard style fireplace because it uses less air and is more efficient. Efficient fireplaces or inserts use less wood than standard fireplaces to produce the same amount of heat, so an added benefit is lower energy cost.

Health effects associated with poor indoor air quality are unexplained flu-like symptoms, headaches, dizziness, fatigue, confusion, eye and nose irritation, and in more serious cases, inability to wake up, asthma, cancer, irreversible brain damage, or death.

Another problem that can occur in larger homes or homes that are tightly constructed is unbalanced house pressure. Symptoms of negative house pressure are moisture condensation on cold surfaces, smoking fireplaces or wood-burning stoves, difficulty lighting a fire in a fireplace, CO backup from gas and wood appliances, back-drafting of appliances (and CO), CO detector alarms frequently, and cold air infiltration through leaks. Children and pets may be more affected than adults. If a person feels ill when at home, but better when outside the home, this is an indication that something is wrong with the house.

A good solution is the PlusAire whole house ventilator, which mixes cool outside air with warm air before sending it on to the furnace and the rest of the house where it is used as combustion air and fresh air for the occupants to breathe. Note: we carry the Plus Aire system as a wholesaler to HVAC and chimney contractors, and will sell and install Plus Aire in the K.C. area. 


Strategies to improve air quality:

  1. Install portable air cleaners
  2. Maintain humidifiers and dehumidifiers and empty water trays
  3. Replace air filters on schedule
  4. Turn on whole house fans or bathroom and kitchen fans with doors or windows open occasionally in Spring and Summer (not during cold weather)
  5. Install a heat recovery ventilator (HRV) to the furnace (assists the furnace only)
  6. Install a whole-house ventilator such as Plus-Aire to bring in make-up air for appliances and fresh air to breathe
  7. Install EPA Certified high-efficiency gas or wood-burning inserts in fireplaces
  8. Be sure clothes dryers are properly vented outdoors and vents are cleaned twice per year
  9. Use a vented gas space heater or stove rather than an un-vented gas appliance
  10. Never use kerosene heaters inside the house
  11. Have a trained licensed HVAC contractor clean and tune-up furnaces annually
  12. Have a professional CSIA Certified Chimney Sweep inspect and clean furnace, fireplace, masonry heater, and wood stove flues annually
  13. Have an energy specialist do a blower door test on the home, which will indicate leaking areas and negative pressure issues


Sources:
www.epa.gov
www.csia.org
www.ncsg.org
www.acca.org
www.plusairplus.com
www.wikipedia.com
www.chimkc.com
www.coheadquarters.com